laser Analysing electronic autocollimator

Quote for: ACT-25LA Laser Analyzing Electronic Autocollimator

We would like to hear from you.

PLX Inc.
40 West Jefryn Blvd.
Deer Park, NY 11729
Phone: 631-586-4190
Fax: 631-586-4196

Back to product page

Request for a quote: ACT-25LA Laser Analyzing Electronic Autocollimator

Specification

Value

3D Models
& Diagrams

Laser TypeCW & Pulsed













 


















Click Here
FoV Autocollimator±40’ (H) x ±25’ (V)
FoV Telescope & Beam Profiler±1°20’ (H) x ±50’ (V)

Clear Aperture

36 mm
Autocollimator’s Resolution0.01 sec
Autocollimator’s Accuracy1.0 sec
Light Source
  • LED: 650 nm,
  • optional: 1060 nm.
Retroreflector for alignment⌀64 mm, N.W 280 g Thread ⌀16 mm, <5”
Beam Divergence MeasurementsDown to 0.2 mRad or better
Line of Sight Retention as Function of Focusing±2.5 seconds
Min. Focusing DistanceLess than 17.5 cm
Built in coarse aiming Laser Pointer

638 nm power <1.0 mW Class 2 laser product, IEC60825-1
Beam width resolutionBetter than 2.5 μrad
Spectral Response350 - 1310 nm (Telescope Mode) VIS 400-700 nm NIR  User specified
Resolution (H x V pixels)

1920 x 1200
Can be divided into multiple working areas, in parallel for up to 400 sectors

Gain Control
x24
Dynamic Range60 dB , 12 bit
Exposure Speed39 µsec to 20 sec
Frame Rate40 fps (8 bit) 30 fps (12 bit) – up to 550 fps@ fast mode (NEW)
Sensor typeProprietary CMOS
Beam divergence accuracy±2%
Position resolution of laser beamBetter than 2.5 μrad
Pixel Size5.86 µm x 5.86 µm
Pixel Bit Depth 8/12 bits
Background SubtractionUser activated
Trigger

  • Internal Software
  • Hardware Falling or Rising Edge
  • Trigger Delay 0.015ms - 4.0 sec
Pan & Tilt knobsLarge Pan, Tilt ±2.5°,
Power Requirements~2 Watt (Via USB 3.0 interface)
Dimensions (L x W x H)mm240 x 154 x 190
Weight (typical)3 kg including cable
Min. Hardware RequirementsCPU i3 1.6 GHz, 4 GB RAM Min. Resolution 1366 x 766
InterfaceUSB 3.0, Windows 7/8/10 (32 & 64 bit)
Operating Temperature0° – 35° C