Quote -
Hard-Mounted Hollow Retroreflector™(HMHR)

We would like to hear from you. PLX Inc. 25 West Jefryn Blvd. Deer Park, NY 11729 Phone: 631-586-4190 Fax: 631-586-4196

Request For a Quote Form - Hard-Mounted Hollow Retroreflector™(HMHR)

Cat. No.Clr. Aper. (in/mm)Beam* Deviation (arc.sec.)Exiting** Wavefront (p.v.633nm)WT.*** (gr.)3D Models
& Diagrams
HM-10-1 1.0/25 1.0 0.15 25 Click Here
HM-10-2 1.0/25 2.0 0.25 25
HM-10-5 1.0/25 5.0 0.60 25
HM-10-10 1.0/25 10.0 1.25 25
HM-10-30 1.0/25 30.0 3.50 25
HM-15-05 1.5/38 0.5 0.10 45 Click Here
HM-15-1 1.5/38 1.0 0.20 45
HM-15-2 1.5/38 2.0 0.35 45
HM-15-5 1.5/38 5.0 0.90 45
HM-15-10 1.5/38 10.0 1.75 45
HM-15-30 1.5/38 30.0 5.25 45
HM-20-05 2.0/50 0.5 0.15 110 Click Here
HM-20-1 2.0/50 1.0 0.25 110
HM-20-2 2.0/50 2.0 0.50 90 Click Here
HM-20-5 2.0/50 5.0 1.25 90
HM-20-10 2.0/50 10.0 2.50 90
HM-20-30 2.0/50 30.0 7.00 90
HM-25-05 2.5/63 0.5 0.25 141 Click Here
HM-25-1 2.5/63 1.0 0.35 141
HM-25-2 2.5/63 2.0 0.60 110 Click Here
HM-25-5 2.5/63 5.0 1.50 110
HM-25-10 2.5/63 10.0 3.00 110
HM-25-30 2.5/63 30.0 9.00 110
HM-50-05 5.0/127 0.5 0.45 780 Click Here
HM-50-1 5.0/127 1.0 0.65 780
HM-50-2 5.0/127 2.0 1.25 551 Click Here
HM-50-5 5.0/127 5.0 3.00 551
HM-50-10 5.0/127 10.0 6.00 551
HM-50-30 5.0/127 30.0 18.0 551

Choose the coating you need:

COATING SPECIFICATION CHART

* Beam Deviation is the maximum deviation from parallelism, expressed in seconds of arc, of any single return beam from any of the 6 sub-apertures of the retroreflector, when the retroreflector is fully-illuminated.


** Exiting Wavefront is the resultant maximum peak-to-valley wavefront deformation from a fully-illuminated retroreflector, where lambda = 633nm.


*** Certain high accuracy models may be heavier than indicated here. Check with us for actual weight.

Unless otherwise specified quotes will be based on standard mirror coatings

Verify your authenticity