Plx-logo
USHM

Quote for: Improved Ultra-Stable Hard-Mounted Retroreflectors (USHM)

We would like to hear from you. PLX Inc. 25 West Jefryn Blvd. Deer Park, NY 11729 Phone: 631-586-4190 Fax: 631-586-4196

Back to product page

Request For a Quote Form - Improved Ultra-Stable Hard-Mounted Retroreflectors (USHM)

Cat. No. Clr. Aper. (in/mm) Beam* Deviation (arc.sec.) Exiting** Wavefront (p.v.633nm) WT.*** (gr.) 3D Models
& Diagrams
USHM-10-1 1.0/25 1.0 0.15 34 Click Here
USHM-10-2 1.0/25 2.0 0.25 34
USHM-10-5 1.0/25 5.0 0.60 34
USHM-10-10 1.0/25 10.0 1.25 34
USHM-10-30 1.0/25 30.0 3.50 34
USHM-15-05 1.5/38 0.5 0.10 73 Click Here
USHM-15-1 1.5/38 1.0 0.20 73
USHM-15-2 1.5/38 2.0 0.35 73
USHM-15-5 1.5/38 5.0 0.90 73
USHM-15-10 1.5/38 10.0 1.75 73
USHM-15-30 1.5/38 30.0 5.25 73
USHM-20-05 2.0/50 0.5 0.15 136 Click Here
USHM-20-1 2.0/50 1.0 0.25 136
USHM-20-2 2.0/50 2.0 0.50 126
USHM-20-5 2.0/50 5.0 1.25 126
USHM-20-10 2.0/50 10.0 2.50 126
USHM-20-30 2.0/50 30.0 7.00 126
USHM-25-05 2.5/63 0.5 0.25 227 Click Here
USHM-25-1 2.5/63 1.0 0.35 227
USHM-25-2 2.5/63 2.0 0.60 206 Click Here
USHM-25-5 2.5/63 5.0 1.50 206
USHM-25-10 2.5/63 10.0 3.00 206
USHM-25-30 2.5/63 30.0 9.00 206
USHM-50-05 5.0/127 0.5 0.45 855 Click Here
USHM-50-1 5.0/127 1.0 0.65 855
USHM-50-2 5.0/127 2.0 1.25 639 Click Here
USHM-50-5 5.0/127 5.0 3.00 639
USHM-50-10 5.0/127 10.0 6.00 639
USHM-50-30 5.0/127 30.0 18.0 639

Choose the coating you need:

COATING SPECIFICATION CHART

* Beam Deviation is the maximum deviation from parallelism, expressed in seconds of arc, of any single return beam from any of the 6 sub-apertures of the retroreflector, when the retroreflector is fully-illuminated.


** Exiting Wavefront is the resultant maximum peak-to-valley wavefront deformation from a fully-illuminated retroreflector, where lambda = 633nm.


*** Certain high accuracy models may be heavier than indicated here. Check with us for actual weight.

Unless otherwise specified quotes will be based on standard mirror coatings